Telephone  01179 561 313 | Email info@heritagefencingbristol.com | fenceerecting@heritagefencingbristol.com
credit-cards-long

Fencing

Fencing Contractors & Suppliers – Bristol & Bath

Overlap Panel

Our overlap panels are made using 3 18mm x 38mm battens on the front of the panel and 5 on the back with approximately 4 inch straight edge slats overlapping in between. All our panels are pressure treated.

Picture35
Height x WidthPrice
6` (1.83m) x 6` (1.83m)£22.50
5` (1.5m) x 6` (1.83m)£21.80
4` (1.2m) x 6` (1.83m)£19.80
3` (0.9m) x 6` (1.83m)£18.00
2` (0.6m) x 6` (1.83m)£16.80

Closeboard Panel

Our close board panels are all made using pressure treated material. The framing is 50mm x 38mm and are cladded using 130mm featheredge slats and are capped using a good heavy duty 50mm x 25mm cap to give the panel a nice looking finish.

image4171
Height x WidthPrice
6` (1.83m) x 6` (1.83m)£35.85
5` (1.5m) x 6` (1.83m)£32.85
4` (1.2m) x 6` (1.83m)£30.85
3` (0.9m) x 6` (1.83m)£28.75

Trellis Square

Our trellis is made using 18mm x 38mm batten. The standard hole size is 4.5 inches but can be made to your specification.

image4172
Height x WidthPrice
6` (1.83m) x 6` (1.83m)£24.95
5` (1.5m) x 6` (1.83m)£23.80
4` (1.2m) x 6` (1.83m)£23.00
3` (0.9m) x 6` (1.83m)£17.25
2` (0.6m) x 6` (1.83m)£15.10
1` (0.3m) ×6` (1.83m)£13.60

Picket Fence

Our picket fencing is made using either round top, pointed or chamfered pales depending on your preference or to match in with your existing fence. The pales are spaced with a 1 3/4 inch gap as standard but again can also be made to your specification.

image4227
Height x WidthPrice
6` (1.83m) x 6` (1.83m)£41.00
5` (1.5m) x 6` (1.83m)£38.50
4` (1.2m) x 6` (1.83m)£30.45
3` (0.9m) x 6` (1.83m)£23.76

Trellis Top Overlap

Our trellis top overlap panels are made using 3 18mm x 38mm battens on the front of the panel and 5 on the back with approximately 4 inch waney edge slats overlapping in between. These panels then include 1ft of trellis on the top as standard but can be made with more or less depending on your needs. They are then treated in a golden-brown water based treatment. Alternatively they can be pressure treated.

image4173
Height x WidthPrice
6` (1.83m) x 6` (1.83m)£33.15
5` (1.5m) x 6` (1.83m)£32.45
4` (1.2m) x 6` (1.83m)£30.45
3` (0.9m) x 6` (1.83m)£28.65

Trellis Top Closeboard

Our close board panels are all made using pressure treated material. The framing is 50mm x 38mm and are cladded using 130mm featheredge slats 1ft of trellis is then incorporated in to the top of the panel this can be altered however to meet your specification with more or less trellis included. These panels are then capped to give the panel a nice finish.

image4174
Height x WidthPrice
6` (1.83m) x 6` (1.83m)£48.50
5` (1.5m) x 6` (1.83m)£46.90
4` (1.2m) x 6` (1.83m)£44.90
3` (0.9m) x 6` (1.83m)£41.60

Concave and Dome Trellis

Our close board panels are all made using pressure treated material. The framing is 50mm x 38mm and are cladded using 130mm featheredge slats 1ft of trellis is then incorporated in to the top of the panel this can be altered however to meet your specification with more or less trellis included. These panels are then capped to give the panel a nice finish.

image4175
Height x WidthPrice
6` (1.83m) x 6` (1.83m)£33.15
5` (1.5m) x 6` (1.83m)£32.45
4` (1.2m) x 6` (1.83m)£30.45
3` (0.9m) x 6` (1.83m)£28.65
2` (0.6m) x 6` (1.83m)£16.90
1` (0.3m) ×6` (1.83m)£15.50

Concave and Dome Closeboard

Our closeboard panels are all made using pressure treated material. The framing is 50mm x 38mm and are cladded using 130mm featheredge slats. The dome panels rise 6 inches from the side of the panel to the highest point in the center. The concave panels fall 6 inches from the highest point on the side to the lowest point in the center. We also include a cap on these panels which really gives the panel a nicer look.

image4176
Height x WidthPrice
6` (1.83m) x 6` (1.83m)£43.40
5` (1.5m) x 6` (1.83m)£41.10
4` (1.2m) x 6` (1.83m)£39.50
3` (0.9m) x 6` (1.83m)£37.40

Concave and Dome Trellis Top Closeboard

Our closeboard panels are all made using pressure treated material. The framing is 50mm x 38mm and are cladded using 130mm featheredge slats 1ft of trellis is then incorporated in to the top of the panel this can be altered however to meet your specification with more or less trellis included. The trellis is then cut to give a 6 inch rise on the dome panels and a 6 inch fall on the concave panels. These panels are then capped to give the panel a nice finish.

image4177
Height x WidthPrice
6` (1.83m) x 6` (1.83m)£51.50
5` (1.5m) x 6` (1.83m)£50.50
4` (1.2m) x 6` (1.83m)£49.50
3` (0.9m) x 6` (1.83m)£48.50

Interwoven

An alternative to an overlap panel except the slats are interwoven which boasts the advantage of looking the same from either side and allows wind to pass through more easily it is therefore less prone to blowing over.

image4178
Height x WidthPrice
6` (1.83m) x 6` (1.83m)£34.70
5` (1.5m) x 6` (1.83m)£33.80
4` (1.2m) x 6` (1.83m)£32.80

Special Panels

These beautiful fencing panels are made from 50mm x 38mm framing and interlocking shiplip T&G boards with a good heavy capping. All are glued with exterior glue and pressure treated in a pale green colour.

By using wooden ‘H’ posts; the panels will slot into them, plus a final ball and cap to complete (if required).

This looks stunning and will last many years.